I had difficulty braking on the Ipace. Was able to stop and turn car off.
When I next tried to drive it pressed the start button and the P started flashing. Put it into drive and other than a flashing D nothing happened.
by accident I found a work round which at least meant I could move my car to safety.
I have no idea why this works and I expect it is not recommended and could be unsafe. So do this at your own risk.
make sure the car is fully off. Press down heavily on the brake peddle. Then whilst still braking heavily push the start button. The P light comes on as normal and you can then put it into drive.
I would be very wary of doing this but say if you’re broken down and need to move it to safety or onto a brake down truck it may be worth a go.