Jaguar I-Pace Forum banner
21 - 40 of 128 Posts
Silencing the annoying seat belt reminder that comes on a millisecond after setting off: in
common with all other JLR products, sit in drivers seat, ignition 'on' but not 'started', plug seatbelt in and out 10 times within 60 secs until you hear a chime.
To reinstate, repeat the process...
 
Ipacelate said:
Silencing the annoying seat belt reminder that comes on a millisecond after setting off: in
common with all other JLR products, sit in drivers seat, ignition 'on' but not 'started', plug seatbelt in and out 10 times within 60 secs until you hear a chime.
Simpler way is to put the seatbelt on before driving off. I have found this to work every time. Never a beep out of the car.
 
There was another one to switch on automatically the forward sensors when driving at slow speeds. I did it, but can't remember how and it's very useful. I'll try to figure it out again, but if anyone knows, maybe they can post it for the others.
 
Ipacelate said:
Silencing the annoying seat belt reminder that comes on a millisecond after setting off: in
common with all other JLR products, sit in drivers seat, ignition 'on' but not 'started', plug seatbelt in and out 10 times within 60 secs until you hear a chime.
Wow! I would never have known that! Thanks
 
scm said:
jason.birchall said:
Should have been more patient and read the subsequent posts 🤨
And here's a tip, please don't include the entire (very long) post you're replying to just to add one or two lines. Trim it down to give enough context so the page doesn't get cluttered with duplicated information (see what I did above?). It also keeps the bandwidth down for those on limited data/speeds.
Superb advice, I'll keep that in mind.
 
I know it isn't a tip as such, but it would great to add one as a ready reference to the latest software versions.

I'm trying to get my dealer to let me know if there are any software updates available for my car and it's like pulling teeth! I would be in a much stronger position if I knew for sure if there is anything available. It is rapid charging enhancements I'm primarily looking to get installed.
 
mclarenpaul said:
There was another one to switch on automatically the forward sensors when driving at slow speeds. I did it, but can't remember how and it's very useful. I'll try to figure it out again, but if anyone knows, maybe they can post it for the others.
This would be very useful. I have it in my Model S and it's incredibly useful. Please share the details if you suddenly remember where you found the setting.
 
mikew said:
I know it isn't a tip as such, but it would great to add one as a ready reference to the latest software versions.

I'm trying to get my dealer to let me know if there are any software updates available for my car and it's like pulling teeth! I would be in a much stronger position if I knew for sure if there is anything available. It is rapid charging enhancements I'm primarily looking to get installed.
Tell me about it :-(
 
ardevd said:
mclarenpaul said:
There was another one to switch on automatically the forward sensors when driving at slow speeds. I did it, but can't remember how and it's very useful. I'll try to figure it out again, but if anyone knows, maybe they can post it for the others.
This would be very useful. I have it in my Model S and it's incredibly useful. Please share the details if you suddenly remember where you found the setting.
It was December 02, headed "Need Some Help" and started by Pacesetter
 
I think (from memory) you drive slowly until the sensor is going off, then in the pop up you can tap the settings icon and there's an "auto" button in there. Only accessible when the sensors are activated though. It was something like that.
 
nipri said:
I have my software updates booked in with the dealer tomorrow & once completed will revert.
Thanks.
Thanks nipri, I'll look forward to your report.
 
Quickest way to change your EV drive settings: Swipe L to R from Home, and it's right there.
Valet Mode will lock the bonnet and boot. Put valuables in bonnet. To secure boot, use a motorcycle tiedown through the back tether loops of seats to cargo rings or Valet can just fold the seats down.
To leave the car in the ON position while exiting: Put in neutral and push the parking brake.
Inside surface of liftgate has a compartment for road triangles.
Cup holders in front are removable.
 
Updating the Maps:

Chewy said:
Go to Jaguar.here.com

You will need to have, or set up, an account.

Login.

Click on "Maps and Services". Enter "NO" to the three options on the small dialogue that appears if it does, unless you want to be hounded.

You will then come to a page that lets you download maps.

Click on the relevant "GET LATEST VERSION" button for your region.

It will ask to download and setup up the "download manager". After it has completed the installation of the "download manager" nothing appears to happen and you will have a job locating the program after it is installed.

What you need to do is click the "GET LATEST VERSION" button again and this time it will fire up the download manager. You will need to put a clean, preferably formatted, 32GB USB memory stick into your PC and let it download the files to that stick. Do not remove the memory stick until the transfer is complete, this may take a considerable time depending upon your internet speed.

Once you have it, you need to go to your car and put it into either of the USB ports in the arm rest cubby hole, not the ones under the Climate Control Knobs as these are for power only.

Then turn on your car. After a short period of time it should detect the USB stick and prompt you to carry out the update. Just follow the onscreen instructions. ABSOLUTELY DO NOT TURN OFF YOUR CAR DURING THE UPDATE PROCESS.

You can drive while it updates as it will take about 40 mins, but you will lose SatNav capability during the update. Remember NOT to get out of your car as this will turn it off (there is a way around this by putting the car into neutral and manually activating the park brake), but best to be sure.

Once the update is complete you can remove the USB memory stick. On completion, the SatNav will reboot and you should be fine.
 
Discussion starter · #39 ·
I've updated the original post - but it seems the only way to flag this and get it to show as "new" is to add another post... unless someone knows otherwise?
 
DougTheMac said:
I've updated the original post - but it seems the only way to flag this and get it to show as "new" is to add another post... unless someone knows otherwise?
It needs being set as a sticky post, that way it will always show at the top of the posts in this section. Only a mod/admin can do it though. Best to PM Rob.
 
21 - 40 of 128 Posts